High-Definition Clear Reprographic Silicone, 100 g Kit

Cat No:SRE-0078

Description

A flexible, high-definition clear silicone molding and encapsulation compound with moderate mixed viscosity and a long room-temperature working time.

Datasheet

Inquiry

Basic Information

Appearance	Clear
Viscosity	3,500-4,500 cSt, mixed
Specific Gravity	1.04
Refractive Index	1.43 at 25 degrees C
Boiling Point	Not available
Color	Clear
Volatile Content	1.0 wt% after 4 hours at 25 degrees C
Features and Benefits	A flexible, high-definition clear silicone molding and encapsulation compound with moderate mixed viscosity and a long room-temperature working time.
Usage Instructions	Mix the two components at the stated ratio while limiting air inclusion. De-air under vacuum for critical work, cast or coat, and cure under the listed conditions.
Packaging	100 g premeasured mixing-cup kit; 220 g kit; 1.1 kg kit
Working Time	12 hours at 25 degrees C
Curing Conditions	80 degrees C for 4 hours or room temperature for 36 hours
Shore A Hardness	45-60
Tensile Strength	5.5-7.0 MPa
Elongation at Break	80-100%
Tear Strength	1.75-2.60 kN/m
Product Standard	nan
PID Resistance	nan
Component System	Two-part system
HMIS Rating	1-1-0-X
Packaging Atmosphere	Nitrogen
Mix Ratio	10:1
Cure Type	Platinum-catalyzed addition cure
Part A Viscosity	5,000-5,500 cSt
Part B Viscosity	50-75 cSt
Critical Surface Tension	23-24 mN/m
Contact Angle (Water)	105-110 degrees
Coefficient of Friction	Approximately 1.5-2.0 in an aqueous environment at 37 degrees C

Applications

Microfluidics; high-definition molding and encapsulation; prototyping.

GET IT!

Eata Silicon delivers a diverse portfolio of silicon-based materials, from high-purity silicon and inorganic silicon compounds to functional silicon materials and customized solutions, supporting research, manufacturing, and next-generation applications across multiple industries.

For Research or Industrial Raw Materials, Not For Personal Medical Use!